Corona 2.4GHz combo CT14F +CR14 for Futaba

item#: CHRCTR14

Retail price: ~~US$0.00~~

Wholesale Price:
US$
€ £ CA$ AU$ HK$ CHF RMB
58.90

Start from: 1 Unit(s)
This item is:

US$58.90 + Shipping Cost

Quantity:

Unit(s)

Description:

RC Receiver , Corona 2.4G CT14F CR14 Combo.

Type:	CT14F DSSS +CR14
Size:	54X30X25MM
Weight:	27g
Operating voltage:	5V (Futaba)
Operating current:	150mA
Output Power:	<100MW
Compatible with:	FUTABA:T14MZ/T12FGH/T12Z

Instruction Manual
Corona 2.4GHz Radio Control System
Thank you for purchasing our Corona 2.4Ghz RF transmitter module & receiver. In order to fully utilize the performance potential of this system, we suggest you first read the manual.

Using the Corona 2.4GHz system

1.    Our new Corona 2.4GHz transmitter module and receiver are designed to completely eliminate radio interference and glitches which have troubled model hobbyists for years. The software designed exclusively for the transmitting module and receiver instantly locates and assigns safe and protected channels. Other flyers in the area can not create interference that normally would corrupt transmitter signals. The Corona 2.4GHz  adheres strictly to Frequency Spread Spectrum communication standards by constantly switching across a wide band of frequencies. Combining Corona’s software we have designed a transmitter and receiver capable of providing modelers the highest performing radio system available.

Features of Corona 2.4GHz transmitting module and receiver
The new lightweight, advanced technology unit has the following features:
1.   Extended operating range 1.5 km range, which has been tested in a real flying environment.

2.    A 3dbi gain transmitting antenna ensures the wave lengths are evenly distributed throughout the transmitting horizon ensuring the stable signal.

3.    One-key user friendly setup mode.

4.    Perfect receiver antennas guarantee the plane receives the signal regardless of the maneuver or attitude.

5.    The unique receiver design makes the Corona module easy to install and ensures reliability.

6.     Corona’s advanced needle design ensures the lightest possible receiver

Installation of transmitting module

1.    Remove the original transmitting module
2.    Put the Corona 2.4 G transmitting module into the module port (See figure 1)

    Figure 1   Futaba 14Mz

3.    Connect the Trainer port
4.    Turn the transmitter power on,check the power indicators and make sure transmitter is in the PPM mode.( See figure 2)

Figure 2                Futaba 14MZ
Transmitting and receiving communication setup

Installation of receivers
As the wave length of 2.4GHz is shorter, its ability to go around obstacles is weaker than receivers whose frequency is below the 100MHz .Therefore, when you install the antenna, you must avoid objects with high conductivity such as; metal parts, servos, ESC’s, battery, wires, and carbon fiber structures.  If possible put the end of the antenna outside of the fuselage.

Receiver and Transmitter Setup Instructions
By following the steps below, this will help to ensure that your Transmitter and Receiver will be correctly setup and ready to use.
1.  Set your transmitter to PPM mode and turn the transmitter off.
2. Now Press and hold the programming button on the transmitting module:  While Pressing Program Button turn your transmitter on :  Once Transmitter is powered up you can then  release the button. The LED on Module will flash between red

Delivery Time is approx. 7 - 14 business days to most US / UK / AU destinations.

Country	Approx. Delivery time
United States / United Kingdom / Australia	7-14 working days
Canada	7-21 working days
Brazil / South America	may take up to 6-8 weeks due to strict Custom Inspection
Italy / France / Spain / Germany/ Eastern Europe	may take up to 6-8 weeks due to strict Custom Inspection

Print Page

Write a Review:

Tell us what you think about this item, share your opinion with other people. Please make sure that your review focus on this item. All the reviews are moderated and will be reviewed within two business days. Inappropriate reviews will not be posted.

Have any question or inquire for this item? Please contact Customer Service. (Our customer representative will get back shortly.)