Digtal Multiplex Function Charger B6V8
|
Specification |
|
|
Operating voltage |
DC 11~18 volts |
|
Idling current |
approx. 100mA |
|
Charge/discharge power |
max. 80/8W |
|
NiCd/MH |
1~15 cells |
|
LiIo/LiPo/LiFe |
1~6 series |
|
Pb |
2~20V |
|
Charge current |
0.1 to 5.0A |
|
Discharg current |
0.1 to 1.0A |
|
No. of cycle |
1 to 5 times |
|
Battery data memory |
up to 5 data |
|
User's setting-up parameters |
|
|
Lithium battery voltage type |
LiIo:3.6V, LiPo:3.7V, LiFe:3.3V |
|
NiCd Delta-peak voltage sensitivity |
5 to 20mV |
|
NiMH Delta-peak voltage sensitivity |
5 to 20mV |
|
Battery temperature cut-off |
20 to 80C or OFF |
|
Waste time between charge/discharge |
1 to 60 min. |
|
Trickle charge mode |
ON/OFF, up to 200mA |
|
Integral timer limit for safety |
10 to 720 min.or OFF |
|
Maximum charging capacity limit for safety |
10 to 9990mAh or OFF |
|
Key beep and buzzer sound |
ON/OFF |
|
Input power low alert |
10 to 11V |
Operating software
Every operating program in the unit is controlled with mutual links and communications to prevent every possible error, so it introduces the maximum safety, such as input voltage warning, reverse polarity protection and Lithium cell-count input error warning.
Individual voltage balancer for Lithium batteries
B6V8 has an individual cell voltage balancer inside. So it does not need any balancer separately when charging Lithium batteries (LiIo/LiPo/LiFe) for voltage balancing.
Accept various types of Lithium battery
B6V8 can accept three types of Lithium batteries - LiIo, LiPo and LiFe. They have different characteristics by their chemistry. You can select any one of them that you are going to process before the job. For their specifications, refer 'Warnings and safety notes' section.
Lithium battery 'Fast' and 'Storage' mode
You can charge Lithium battery for special purposes. 'Fast' charge reduces the charging time of Lithium battery and 'Storage' mode controls the final voltage of the battery to be suit for long time storage.
Maximum safety
Delta-peak sensitivity : The automatic charge termination program works on the principle of the Delta-peak voltage detection. (NiCd/NiMH)
Auto-charge current limit : When charging NiCd or NiMH at 'AUTO' current mode, you can set the upper limit of charge current to avoid from feeding high current to the battery. This is very useful when charging the low impedance and small capacity NiMH battery in 'AUTO' mode.
Capacity limit : The charging capacity always calculated by multiple of the charging current and time. If the charging capacity exceeds the limit the process will be terminated automatically when you set the maximum value.
Data store/load
For users convenience it can store maximum 5 data of different batteries. You can establish the data contains program setting of the battery to charge or discharge continually. These data can be called out at any time you need and the process can be executed without program setting.
Cyclic charging/discharging
Perform 1 to 5 cycles of charge>discharge or discharge>charge continually for battery refreshing and balancing.
PC based analysis using USB communication
For technical expert, B6V8 offers PC based program can analysis the characteristic of the battery by USB port. It shows a graph of voltage, current, capacity and temperature curves. It also shows the individual voltage of each cell in the Lithium battery pack.
Robust outer aluminum case
High-quality aluminum case is durable and very efficient to cool out the internal heat
Tell us what you think about this item, share your opinion with other people. Please make sure that your review focus on this item. All the reviews are moderated and will be reviewed within two business days. Inappropriate reviews will not be posted.
Have any question or inquire for this item? Please contact Customer Service. (Our customer representative will get back shortly.)